magic {mgcv}R Documentation

Stable Multiple Smoothing Parameter Estimation by GCV or UBRE, with optional fixed penalty

Description

Function to efficiently estimate smoothing parameters in generalized ridge regression problems with multiple (quadratic) penalties, by GCV or UBRE. The function uses Newton's method in multi-dimensions, backed up by steepest descent to iteratively adjust the smoothing parameters for each penalty (one penalty may have a smoothing parameter fixed at unity ).

For maximal numerical stability the method is based on orthogonal decomposition methods, and attempts to deal with numerical rank deficiency gracefully using a truncated singular value decomposition approach.

Usage

magic(y,X,sp,S,off,rank=NULL,H=NULL,C=NULL,w=NULL,
      gamma=1,scale=1,gcv=TRUE,ridge.parameter=NULL,
      control=list(maxit=50,tol=1e-6,step.half=25,
              rank.tol=.Machine$double.eps^0.5))

Arguments

y is the response data vector.
X is the model matrix.
sp is the array of smoothing parameters multiplying the penalty matrices stored in S. Any that are negative are autoinitialized, otherwise they are taken as supplying starting values. A supplied starting value will be reset to a default starting value if the gradient of the GCV/UBRE score is too small at the supplied value.
S is a list of of penalty matrices. S[[i]] is the ith penalty matrix, but note that it is not stored as a full matrix, but rather as the smallest square matrix including all the non-zero elements of the penalty matrix. Element 1,1 of S[[i]] occupies element off[i], off[i] of the ith penalty matrix. Each S[[i]] must be positive semi-definite.
off is an array indicating the first parameter in the parameter vector that is penalized by the penalty involving S[[i]].
rank is an array specifying the ranks of the penalties. This is useful, but not essential, for forming square roots of the penalty matrices.
H is the optional offset penalty - i.e. a penalty with a smoothing parameter fixed at 1. This is useful for allowing regularization of the estimation process, fixed smoothing penalties etc.
C is the optional matrix specifying any linear equality constraints on the fitting problem. If b is the parameter vector then the parameters are forced to satisfy Cb=0.
w the regression weights. If this is a matrix then it is taken as being the square root of the inverse of the covariance matrix of y, specifically V_y^{-1}=w'w. If w is an array then it is taken as the diagonal of this matrix, or simply the weight for each element of y.
gamma is an inflation factor for the model degrees of freedom in the GCV or UBRE score.
scale is the scale parameter for use with UBRE.
gcv should be set to TRUE if GCV is to be used, FALSE for UBRE.
ridge.parameter It is sometimes useful to apply a ridge penalty to the fitting problem, penalizing the parameters in the constrained space directly. Setting this parameter to a value greater than zero will cause such a penalty to be used, with the magnitude given by the parameter value.
control is a list of iteration control constants with the following elements:
maxit
The maximum number of iterations of the magic algorithm to allow.

tol
The tolerance to use in judging convergence.

step.half
If a trial step fails then the method tries halving it up to a maximum of step.half times.

rank.tol
is a constant used to test for numerical rank deficiency of the problem. Basically any singular value less than rank_tol multiplied by the largest singular value of the problem is set to zero.

Details

The method is a computationally efficient means of applying GCV or UBRE (often approximately AIC) to the problem of smoothing parameter selection in generalized ridge regression problems of the form:

minimise || W (Xb-y) ||^2 + b'Hb + theta_1 b'S_1 b + theta_2 b'S_2 b + . . .

possibly subject to constraints Cb=0. X is a design matrix, b a parameter vector, y a data vector, W a weight matrix, S_i a positive semi-definite matrix of coefficients defining the ith penalty with associated smoothing parameter theta_i, H is the positive semi-definite offset penalty matrix and C a matrix of coefficients defining any linear equality constraints on the problem. X need not be of full column rank.

The theta_i are chosen to minimize either the GCV score:

V_g = n ||W(y-Ay)||^2/[tr(I - g A)]^2

or the UBRE score:

V_u =||W(y-Ay||^2/n - 2 s tr(I - g A)/n + s

where g is gamma the inflation factor for degrees of freedom (usually set to 1) and s is scale, the scale parameter. A is the hat matrix (influence matrix) for the fitting problem (i.e the matrix mapping data to fitted values). Dependence of the scores on the smoothing parameters is through A.

The method operates by Newton or steepest descent updates of the logs of the theta_i. A key aspect of the method is stable and economical calculation of the first and second derivatives of the scores w.r.t. the log smoothing parameters. Because the GCV/UBRE scores are flat w.r.t. very large or very small theta_i, it's important to get good starting parameters, and to be careful not to step into a flat region of the smoothing parameter space. For this reason the algorithm rescales any Newton step that would result in a log(theta_i) change of more than 5. Newton steps are only used if the Hessian of the GCV/UBRE is postive definite, otherwise steepest descent is used. Similarly steepest descent is used if the Newton step has to be contracted too far (indicating that the quadratic model underlying Newton is poor). All initial steepest descent steps are scaled so that their largest component is 1. However a step is calculated, it is never expanded if it is successful (to avoid flat portions of the objective), but steps are successively halved if they do not decrease the GCV/UBRE score, until they do, or the direction is deemed to have failed. (Given the smoothing parameters the optimal b parameters are easily found.)

The method is coded in C with matrix factorizations performed using LINPACK and LAPACK routines.

Value

The function returns a list with the following items:

b The best fit parameters given the estimated smoothing parameters.
scale the estimated (GCV) or supplied (UBRE) scale parameter.
score the minimized GCV or UBRE score.
sp an array of the estimated smoothing parameters.
rV a factored form of the parameter covariance matrix. The (Bayesian) covariance matrix of the parametes b is given by rV%*%t(rV)*scale.
gcv.info is a list of information about the performance of the method with the following elements:
full.rank
The apparent rank of the problem: number of parameters less number of equality constraints.
rank
The estimated actual rank of the problem (at the final iteration of the method).
fully.converged
is TRUE if the method converged by satisfying the convergence criteria, and FALSE if it coverged by failing to decrease the score along the search direction.
hess.pos.def
is TRUE if the hessian of the UBRE or GCV score was positive definite at convergence.
iter
is the number of Newton/Steepest descent iterations taken.
score.calls
is the number of times that the GCV/UBRE score had to be evaluated.
rms.grad
is the root mean square of the gradient of the UBRE/GCV score w.r.t. the smoothing parameters.

Note that some further useful quantities can be obtained using magic.post.proc.

Author(s)

Simon N. Wood simon.wood@r-project.org

References

Wood, S.N. (2004) Stable and efficient multiple smoothing parameter estimation for generalized additive models. J. Amer. Statist. Ass. 99:673-686

http://www.stats.gla.ac.uk/~simon/

See Also

magic.post.proc, mgcv, gam,

Examples

library(mgcv)
set.seed(1);n<-400;sig2<-4
x0 <- runif(n, 0, 1);x1 <- runif(n, 0, 1)
x2 <- runif(n, 0, 1);x3 <- runif(n, 0, 1)
f <- 2 * sin(pi * x0)
f <- f + exp(2 * x1) - 3.75887
f <- f+0.2*x2^11*(10*(1-x2))^6+10*(10*x2)^3*(1-x2)^10-1.396
e <- rnorm(n, 0, sqrt(sig2))
y <- f + e
# set up additive model
G<-gam(y~s(x0)+s(x1)+s(x2)+s(x3),fit=FALSE)
# fit using magic
mgfit<-magic(G$y,G$X,G$sp,G$S,G$off,G$rank,C=G$C)
# and fit using gam as consistency check
b<-gam(G=G)
mgfit$sp;b$sp  # compare smoothing parameter estimates
edf<-magic.post.proc(G$X,mgfit,G$w)$edf  # extract e.d.f. per parameter
# get termwise e.d.f.s
twedf<-0;for (i in 1:4) twedf[i]<-sum(edf[((i-1)*10+1):(i*10)])
twedf;b$edf  # compare

[Package mgcv version 1.3-12 Index]